Things that You Have to Understand About Log Home Builder Kits
The first decision which you have to make when you think about using the log home builder kits for building that log home is the method of its construction. You can choose the saddle notch method or you may go for the butt-and-pass method. Every style would refer to the way in which the home is joined at its corners.
You have to know that the saddle notch method would require the builders to cut that notch in the log that fits a perpendicular log that is going to be placed on top of this. The logs are being continuously stacked in this fashion for building a wall and the weight of the logs would make them appear lightly and make such secure corners. There are some builders which drive a bolt or stake through the logs in order to add security.
Through the butt-and-pass method, such perpendicular log is butted against the existing log when the stacking of the log is started. At the second level of stacking, the log would pass through the first perpendicular log. On the third level, the log is going to butt up against such perpendicular log. Such stacking is going to continue until you finish the wall.
Lessons Learned About Builders
Know that such butt-and-pass method that is used with log home kits would make spacing between the logs which have to be filled with chinking and insulation, which is a method which equates to caulking the log home. The logs are secured with stakes and bolts driven down from one log to the next.
A Brief History of Homes
Know that the saddle notch method is naturally more expensive for the homebuyers and the builders. One reason for such is due to the amount of precision for aligning the logs in a proper way. It would take careful measuring to have the logs cut with the right inch specifications so that the perpendicular log may fit into the groove and then create that tight corner.
Even if a few companies out there are do claim to use the butt-and-pass method for the log home kits, there are also critics that have contended this type of method isn’t possible through the use of the kit. The kits are being manufactured in other areas and they are being shipped for assembly on the property. Some of the builders have also claimed that the butt-and-pass method is sturdy and this cannot be shipped in parts and be reassembled.
A challenge which many homeowners purchasing the log home builder kits face is the settling which happens after assembly. This is one natural process which forces some parts of the house to fall out of the alignment about a year or so after the logs have totally dried up.